Skip to main content

ESGE Magic Wand - Bamix disassemble

Guide Information

= Done = Incomplete

      Describe the specific part or component of this device you're working on. Ex: Battery

      Create a title.

      This brief summary will only appear in search results.

      Communicate background information before the reader dives into the guide.

      Guide Steps

      Step 1 — Remove top cover

      Unplug the power cord and remove the cutter blade.

      Step 2

      This is what it looks like under the cover.

      Step 3

      The handle is fastened with a Torx T8 machine screw and a Torx T8 plastic screw. You will need a long screwdriver.

      Step 4

      Unclip the handle from one side.

      Step 5

      First try If the bell can be unscrewed. It is fastened with a left-hand thread, so turn it in the "wrong direction", clockwise, to loosen it.

      Step 6

      Pull off the lower case over the shaft.

      Your contributions are licensed under the open source Creative Commons license.