Skip to main content

開口方法とバッテリー接続の外し方

Notice: You are editing a prerequisite guide. Any changes you make will affect all 17 guides that include this step.

Translating step 19

English
Japanese
Step 19
Opening Procedure and Battery Disconnect: step 0, image 1 of 3 Opening Procedure and Battery Disconnect: step 0, image 2 of 3 Opening Procedure and Battery Disconnect: step 0, image 3 of 3
  • Use a pair of tweezers to peel back the silver tape securing the right display cable to the motherboard.

  • Do not remove the tape from the ribbon cable.

  • Use the flat end of a spudger to lift the right display cable straight up and disconnect it from the motherboard.

ピンセットを使って、右側ディスプレイケーブルをマザーボードに固定しているシルバーのテープを剥がします。

リボンケーブルからテープを外さないでください。

スパッジャーの平面側先端を使って、右側ディスプレイケーブルをマザーボードからまっすぐ持ち上げて、接続を外します。

Your contributions are licensed under the open source Creative Commons license.