Skip to main content

DeLonghi ESAM xxxx - Test Mode

Guide Information

= Done = Incomplete

      Describe the specific part or component of this device you're working on. Ex: Battery

      Create a title.

      This brief summary will only appear in search results.

      Communicate background information before the reader dives into the guide.

      Guide Steps

      Step 1 — Activate Test Mode

      Pull the plug. Switch on rear side is in position "On".

      Step 2 — Motor Test

      Press the key "one cup". The motor should drive down. If it reaches the lower end position the correspondending LED will light up.

      Step 3 — Pump Test

      Press the "steam" key. The pump should be activated. If the steam wand is opened the water should flow.

      Step 4 — Grinder Test

      Press the "ECO" key. The grinder should be activated.

      Step 5 — Heater Test

      Press the "Rinse" key. One LED should light up and the heater should be activated. If it reaches the end temperature, the LED goes out.

      Step 6

      Pull the plug again to leave the test mode.

      Your contributions are licensed under the open source Creative Commons license.