Skip to main content

Jura Z Model remove ceramic valve

German
English

Guide Prerequisites

All prerequisite guides must be translated before this translation is considered complete.

Opening the Jura Z series housing

Guide Information

= Done = Incomplete
Jura Z Modelle Keramikventil ausbauen
    Das Keramikventil kann recht leicht ausgebaut und getauscht werden. Neuere Z-Modelle sind [guide|180153|hier] beschrieben.

    Bevor du ein neues Keramikventil kaufst, solltest du probieren, es zu reparieren. Du kannst viel Geld und Ressourcen sparen. Benutze dazu [guide|180142|diese Anleitung].

      Guide Steps

      Step 1

      The ceramic valve is only pushed in. Release the detents at the bottom of the white plastic base and slide the valve to the right.

      Your contributions are licensed under the open source Creative Commons license.