Skip to main content
English
German

Translating step 4

Step 4
Remove the two 3 mm screws attached to the laptop's hard drive metal cage using the Phillips #00 screwdriver. Once the screws have been removed, gently disconnect the hard drive by pulling the hard drive away from the integrated SATA port.
  • Remove the two 3 mm screws attached to the laptop's hard drive metal cage using the Phillips #00 screwdriver.

  • Once the screws have been removed, gently disconnect the hard drive by pulling the hard drive away from the integrated SATA port.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.