Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Spanish

Translating step 8

Step 8
Now that the top, left, and right edges of the glass are free from the display, slowly lift the top edge of the glass panel and gently rotate it out of the display. If necessary, use the flat end of a spudger to free the bottom edge of the glass display panel from the display assembly.
  • Now that the top, left, and right edges of the glass are free from the display, slowly lift the top edge of the glass panel and gently rotate it out of the display.

  • If necessary, use the flat end of a spudger to free the bottom edge of the glass display panel from the display assembly.

  • Before reassembling, be sure to clean both the inside of the glass display panel and the LCD as any dust or fingerprints trapped inside will be annoyingly visible when the machine is on.

Ahora que los bordes superior, izquierdo y derecho del cristal están libres de la pantalla, levante lentamente el borde superior del panel de vidrio y gírelo suavemente fuera de la pantalla.

Si es necesario, utilice el extremo plano de un spudger para liberar el borde inferior del panel de visualización de cristal del conjunto de visualización.

Antes de volver a montar, asegúrese de limpiar tanto el interior de la pantalla de cristal como la pantalla LCD, ya que cualquier polvo o huellas dactilares atrapadas en el interior serán irritantemente visibles cuando la máquina esté encendida.

Your contributions are licensed under the open source Creative Commons license.