Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Chinese

Translating step 7

Step 7
Use a heat gun or hair dryer to soften the adhesive under the black strip along the left side of the front glass panel. Attach a suction cup along the left side of the front glass panel.
  • Use a heat gun or hair dryer to soften the adhesive under the black strip along the left side of the front glass panel.

  • Attach a suction cup along the left side of the front glass panel.

  • Pull up on the glass panel while you use the flat end of a spudger to separate it from the rest of the display assembly.

  • Continue working along the left edge of the front display glass until it is separated from the display.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.