Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
Dutch

Translating step 8

Step 8
Place the watch on a flat surface and use an opening pick to slice through any remaining adhesive. When slicing near the crown, don't insert the opening pick deeper than 1/16th of an inch (~2 mm).
  • Place the watch on a flat surface and use an opening pick to slice through any remaining adhesive.

  • When slicing near the crown, don't insert the opening pick deeper than 1/16th of an inch (~2 mm).

  • Slide an opening pick under the opposite display edge of the watch crown.

Plaats het horloge op een vlak oppervlak en gebruik een openingsplectrum om de resterende lijm door te snijden.

Steek je openingsplectrum, in de buurt van de digitale kroon, niet verder dan ongeveer 2 mm (1/16e inch) in het toestel.

Schuif je openingsplectrum onder de kant van het scherm tegenover de digitale kroon.

Your contributions are licensed under the open source Creative Commons license.