Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
French

Translating step 6

Step 6
When slicing near the crown, don't insert the opening pick deeper than 1/16th of an inch (~2 mm). Slide the opening pick around the corner and along the long edge where the crown is located to cut the display adhesive.
  • When slicing near the crown, don't insert the opening pick deeper than 1/16th of an inch (~2 mm).

  • Slide the opening pick around the corner and along the long edge where the crown is located to cut the display adhesive.

Quand vous tranchez à côté de la couronne, n'insérez pas le médiator de plus de 2 mm (1/16").

Avec votre médiator, parcourez le coin puis le bord long comprenant la couronne digitale pour faire céder l'adhésif.

Your contributions are licensed under the open source Creative Commons license.