Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 12 guides that include this step.

English
Spanish

Translating step 1

Step 1
Completely power off your phone before you begin disassembly.
Heat the rear cover
  • Completely power off your phone before you begin disassembly.

  • Heat an iOpener and apply it to the left side of the rear cover for one minute.

  • A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the screen, internal battery, and the plastic rear cover are susceptible to heat damage.

Apaga completamente el teléfono antes de empezar a desmontarlo.

Calienta un iOpener y aplícalo en el lado izquierdo de la tapa trasera durante un minuto.

También puedes utilizar un secador de pelo, una pistola de calor o una plancha, pero ten cuidado de no sobrecalentar el teléfono: la pantalla, la batería interna y la tapa trasera de plástico son susceptibles de sufrir daños por el calor.

Your contributions are licensed under the open source Creative Commons license.