Skip to main content
English
Spanish

Translating step 3

Step 3
With the SSD screw removed, the SSD will pop up at a shallow angle. Grip the end of the SSD and pull it away from its M.2 board connector to remove it.
Remove the SSD
  • With the SSD screw removed, the SSD will pop up at a shallow angle.

  • Grip the end of the SSD and pull it away from its M.2 board connector to remove it.

  • During reassembly, insert the SSD at a shallow angle into its board connector, and secure it back into its horizontal position with the SSD screw.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.