Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Italian

Translating step 2

Step 2
Grip the antenna board and pull it directly away from the center chassis to disconnect it. Don't pull the antenna board up until it is completely disconnected. Remove the antenna board.
  • Grip the antenna board and pull it directly away from the center chassis to disconnect it.

  • Don't pull the antenna board up until it is completely disconnected.

  • Remove the antenna board.

  • During reassembly, align the board's connector with the port on the center chassis and press to reconnect.

Afferra la scheda dell'antenna ed estraila direttamente dal centro della scocca per scollegarla.

Non piegare la scheda dell'antenna verso l'alto fino a che non è completamente scollegata.

Rimuovi la scheda dell'antenna.

Durante il riassemblaggio, allinea il connettore della scheda con la porta al centro della scocca e premi per ricollegare il tutto.

Your contributions are licensed under the open source Creative Commons license.