Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
German

Translating step 2

Step 2
Grip the antenna board and pull it directly away from the center chassis to disconnect it. Don't pull the antenna board up until it is completely disconnected. Remove the antenna board.
  • Grip the antenna board and pull it directly away from the center chassis to disconnect it.

  • Don't pull the antenna board up until it is completely disconnected.

  • Remove the antenna board.

  • During reassembly, align the board's connector with the port on the center chassis and press to reconnect.

Greife die WLAN-Platine und ziehe gerade aus dem Chassis, um sie zu lösen.

Ziehe die WLAN-Platine nicht nach oben, solange sie nicht komplett getrennt ist.

Entferne die WLAN-Platine.

Richte den Anschluss der Platine beim Zusammenbau mit den Anschlüssen am Chassis aus und drücke die Platine an ihren Ort.

Your contributions are licensed under the open source Creative Commons license.