Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
German

Translating step 16

Step 16
Grip and compress the locking tab on the 2-pin power connector. While compressing the locking tab, lift the connector straight up to disconnect it from the board. While compressing the locking tab, lift the connector straight up to disconnect it from the board.
Remove the 2-pin power cable
  • Grip and compress the locking tab on the 2-pin power connector.

  • While compressing the locking tab, lift the connector straight up to disconnect it from the board.

Greife und drücke die Halteklammer am 2-Pin-Stromkabel zusammen.

Halte die Klammer gedrückt und ziehe den Anschluss gerade nach oben, um ihn vom Board zu lösen.

Your contributions are licensed under the open source Creative Commons license.