Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
German

Translating step 10

Step 10
Grip the antenna board and pull it directly away from the center chassis to disconnect it. During reassembly, align the board's connector with the port on the center chassis and press to reconnect. During reassembly, align the board's connector with the port on the center chassis and press to reconnect.
  • Grip the antenna board and pull it directly away from the center chassis to disconnect it.

  • During reassembly, align the board's connector with the port on the center chassis and press to reconnect.

Greife die Antennenplatine und ziehe sie gerade vom Chassis ab, um sie zu lösen.

Richte beim Zusammenbau den Anschluss der Platine mit dem Anschluss am Chassis aus und drücke sie zusammen.

Your contributions are licensed under the open source Creative Commons license.