Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
Japanese

Translating step 4

Step 4
Use a T8 Torx driver to remove the three 7.4 mm screws securing the center chassis assembly to the shell.
Remove the chassis screws
  • Use a T8 Torx driver to remove the three 7.4 mm screws securing the center chassis assembly to the shell.

T8トルクスドライバーを使って、中央のシャーシアセンブリを本体に固定している7.4mmネジを3本外します。

Your contributions are licensed under the open source Creative Commons license.