Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
Italian

Translating step 4

Step 4
Use a T8 Torx driver to remove the three 7.4 mm screws securing the center chassis assembly to the shell.
Remove the chassis screws
  • Use a T8 Torx driver to remove the three 7.4 mm screws securing the center chassis assembly to the shell.

Usa un cacciavite Torx T8 per svitare le tre viti da 7,4 mm che fissano il gruppo della struttura centrale al guscio.

Your contributions are licensed under the open source Creative Commons license.