Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
German

Translating step 4

Step 4
Use a T8 Torx driver to remove the three 7.4 mm screws securing the center chassis assembly to the shell.
Remove the chassis screws
  • Use a T8 Torx driver to remove the three 7.4 mm screws securing the center chassis assembly to the shell.

Entferne die drei 7,4 mm Torx T8 Schrauben, die das zentrale Chassis am Gehäuse befestigen.

Your contributions are licensed under the open source Creative Commons license.