Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Chinese

Translating step 6

Step 6
Insert a fourth opening pick at the top left corner. Do not insert the opening pick deeper than 1 cm (1/3rd of an inch) to avoid damage the fingerprint sensor cable.
  • Insert a fourth opening pick at the top left corner.

  • Do not insert the opening pick deeper than 1 cm (1/3rd of an inch) to avoid damage the fingerprint sensor cable.

  • Slide the tip of the opening pick to the bottom left corner to cut the adhesive.

  • Leave the opening pick in its place to prevent the adhesive from resealing.

在左上角插入第四个空位。

请勿将三角撬片插入的深度超过1厘米(1/3英寸),以免损坏指纹传感器电缆。

将三角撬片的尖端滑到左下角以切割胶粘剂。

将三角撬片留在原处,以防止胶粘剂重新密封。

Your contributions are licensed under the open source Creative Commons license.