Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 13 guides that include this step.

English
Chinese

Translating step 6

Step 6
The screen adhesive is weak, so you should not need to re-apply heat. If the screen is hard to slice, apply heat to the difficult area for one minute and try again. Insert another opening pick into the right  edge of the phone at an angle where a gap has already formed to prevent damage to the OLED panel. Slide the opening pick around the top of the phone to cut the adhesive.
  • The screen adhesive is weak, so you should not need to re-apply heat. If the screen is hard to slice, apply heat to the difficult area for one minute and try again.

  • Insert another opening pick into the right edge of the phone at an angle where a gap has already formed to prevent damage to the OLED panel.

  • Slide the opening pick around the top of the phone to cut the adhesive.

  • Leave the pick inserted along the top edge to prevent the adhesive from resealing.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.