Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 13 guides that include this step.

English
Japanese

Translating step 5

Step 5
Slide the pick along the right edge of the screen to cut the adhesive. Do not insert the pick more than 1/4 inch (6 mm) or you may damage the screen's flex cable. Leave the pick in the bottom-right corner to prevent the adhesive from re-sealing.
Slice through the display adhesive
  • Slide the pick along the right edge of the screen to cut the adhesive.

  • Do not insert the pick more than 1/4 inch (6 mm) or you may damage the screen's flex cable.

  • Leave the pick in the bottom-right corner to prevent the adhesive from re-sealing.

ピックをスクリーンの右端に沿ってスライドして、接着剤を切開します。

ピックを6mm以上差し込まないでください。スクリーンのフレックスケーブルを破損することがあります。

接着剤の再装着を防ぐため、デバイス右上コーナーに、開口ピックを差し込んだまま、次の作業に移ります。

Your contributions are licensed under the open source Creative Commons license.