Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 13 guides that include this step.

English
Italian

Translating step 5

Step 5
Slide the pick along the right edge of the screen to cut the adhesive. Do not insert the pick more than 1/4 inch (6 mm) or you may damage the screen's flex cable. Leave the pick in the bottom-right corner to prevent the adhesive from re-sealing.
Slice through the display adhesive
  • Slide the pick along the right edge of the screen to cut the adhesive.

  • Do not insert the pick more than 1/4 inch (6 mm) or you may damage the screen's flex cable.

  • Leave the pick in the bottom-right corner to prevent the adhesive from re-sealing.

Fai scorrere il plettro sotto il bordo destro dello schermo per tagliare l'adesivo.

Non infilare il plettro per più di 6 mm o potresti danneggiare il cavo a nastro dello schermo.

Lascia il plettro sotto l'angolo in basso a destra per evitare che l'adesivo si reincolli.

Your contributions are licensed under the open source Creative Commons license.