Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 13 guides that include this step.

English
German

Translating step 5

Step 5
Slide the pick along the right edge of the screen to cut the adhesive. Do not insert the pick more than 1/4 inch (6 mm) or you may damage the screen's flex cable. Leave the pick in the bottom-right corner to prevent the adhesive from re-sealing.
Slice through the display adhesive
  • Slide the pick along the right edge of the screen to cut the adhesive.

  • Do not insert the pick more than 1/4 inch (6 mm) or you may damage the screen's flex cable.

  • Leave the pick in the bottom-right corner to prevent the adhesive from re-sealing.

Schiebe das Plektrum an der rechten Kante des Displays entlang, um den Kleber zu durchtrennen.

Setze das Plektrum nicht weiter als 6 mm ein, da sonst das Flachbandkabel des Displays beschädigt werden kann.

Lasse das Plektrum in der oberen rechten Ecke stecken, um zu verhindern, dass sich der Kleber wieder verbindet.

Your contributions are licensed under the open source Creative Commons license.