Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 13 guides that include this step.

English
Chinese

Translating step 4

Step 4
This step shows how to insert your pick without damaging the OLED panel. Do this before slicing the adhesive. With the pick 1 mm into the gap, pivot the pick upwards to a steep angle. At a steep angle, carefully push the pick into the gap about 1/4 inch (6 mm). The pick should slide in below the OLED panel.
Guide the opening pick under the OLED panel
  • This step shows how to insert your pick without damaging the OLED panel. Do this before slicing the adhesive.

  • With the pick 1 mm into the gap, pivot the pick upwards to a steep angle.

  • At a steep angle, carefully push the pick into the gap about 1/4 inch (6 mm). The pick should slide in below the OLED panel.

  • Stop if you feel the point of the pick hitting a ridge. The pick may be pressing against the edge of the OLED panel. Angle the pick and try again.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.