Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
Chinese

Translating step 4

Step 4
Peel the white liner off the back of the small temperature sensor board in order to expose the adhesive. Adhere the temperature sensor board to an exposed, metal surface of the SSD, close to the SATA connector. Fold the excess temperature sensor wires so that they are out of the way while you install the enclosure.
  • Peel the white liner off the back of the small temperature sensor board in order to expose the adhesive.

  • Adhere the temperature sensor board to an exposed, metal surface of the SSD, close to the SATA connector.

  • Fold the excess temperature sensor wires so that they are out of the way while you install the enclosure.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.