Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
Italian

Translating step 1

Step 1
Follow the next steps if you are replacing your hard drive with an SSD kit. If your SSD enclosure looks like the first image, follow this guide instead. Line up the SSD connectors with the metal enclosure's sockets.
Replace the hard drive with an SSD
  • Follow the next steps if you are replacing your hard drive with an SSD kit.

  • If your SSD enclosure looks like the first image, follow this guide instead.

  • Line up the SSD connectors with the metal enclosure's sockets.

  • Press the drive against the enclosure sockets until the SSD is firmly seated.

  • The SSD connects with the enclosure in only one direction. If the connectors don't line up, rotate the SSD and try again.

Segui i prossimi passi se stai sostituendo il tuo hard drive con un kit SSD.

Se l'alloggiamento del tuo SSD si presenta come la prima immagine, segui invece quest'altra guida.

Allinea il connettore dell'SSD con i rispettivi zoccoli dell'involucro metallico.

Premi il disco contro gli zoccoli dell'alloggiamento finché l'SSD non si blocca in posizione corretta.

L'SSD si connette con involucro in una sola direzione. Se i connettori non sono allineati, gira l'SSD e prova di nuovo.

Your contributions are licensed under the open source Creative Commons license.