Skip to main content
Italian
English

Huawei P Smart 2019 Disassembly

Guide Information

= Done = Incomplete

      Describe the specific part or component of this device you're working on. Ex: Battery

      Create a title.

      This brief summary will only appear in search results.

      Communicate background information before the reader dives into the guide.

      Guide Steps

      Step 1

      Turn off the phone and remove the SIM tray.

      Step 2

      Remove the black adhesive tape.

      Step 3

      In the next steps, you will unplug four connectors: those of the battery, touch id, display and mother board.

      Step 4

      Unplug the display connector.

      Step 5

      If you are trying to replace the display, I advise to test the display before mounting it. Plug the display connector to the lower logic board and then connect the battery connector. Now try if the new LCD and touch screen are working fine.

      Step 6

      Unplug the antenna connector.

      Step 7

      Unplug the front camera connector and put it aside.

      Step 8

      Remove the 4 screws that hold the logic board.

      Step 9

      Use a hair dryer to warm up the glue that holds the front speaker and remove it.

      Step 10

      Remove the screws that hold the speaker and the cover of the lower logic board in place.

      Step 11

      Unhook the lower logic board and remove it.

      Step 12

      If you're replacing the display assembly with the frame already installed, you can move all the components on the new display.

      Your contributions are licensed under the open source Creative Commons license.