Fix Your Stuff Community Store

iMac Intel 27" Retina 5K-scherm 2019 Vervanging van de schermmodule

Notice: You are editing a prerequisite guide. Any changes you make will affect all 13 guides that include this step.

Previous step Next step

Translating step 10

Back to Guide
English
Dutch
Step 10
iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement: step 0, image 1 of 3 iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement: step 0, image 2 of 3 iMac Intel 27" Retina 5K Display 2019 Display Assembly Replacement: step 0, image 3 of 3

  • While the opening tool did the lion's share of the work, the display will still be slightly adhered to the case. A plastic card will be necessary to free up the last of this adhesive.

  • Set the iMac face-up on a table.

  • Starting from the top right corner of the iMac, insert a plastic card between the display and frame.

  • Be careful not to insert it more than 3/8" (9.5 mm), or you may damage internal components.

Hoewel je openingstool het leeuwendeel van het werk al heeft gedaan, zal het scherm nog steeds lichtjes aan de behuizing vastgelijmd zitten. Een plastic kaart is tot slot nodig om de laatste stukken lijm los te maken.

Zet je iMac op een tafel met het scherm naar boven.

Steek vervolgens een plastic kaart tussen het scherm en het frame, beginnend in de rechter bovenhoek van de iMac.

Wees voorzichtig en zorg dat je je kaart niet verder dan ongeveer 9.5 mm (3/8") in de computer steekt, aangezien je in dat geval riskeert onderdelen in de computer te beschadigen.

-[* icon_note] While the opening tool did the lion's share of the work, the display will still be slightly adhered to the case. A plastic card will be necessary to free up the last of this adhesive.
+[* icon_note] While the opening tool did the lion's share of the work, the display will still be slightly adhered to the case. A [product|IF145-101|plastic card] will be necessary to free up the last of this adhesive.
[* black] Set the iMac face-up on a table.
[* black] Starting from the top right corner of the iMac, insert a plastic card between the display and frame.
[* icon_caution] Be careful not to insert it more than 3/8" (9.5 mm), or you may damage internal components.

Your contributions are licensed under the open source Creative Commons license.