Skip to main content
English
Chinese

Translating step 2

Step 2
Apply a few drops of high concentration (90% or greater) isopropyl alcohol underneath the battery at the tear-shaped indents near the corners of the battery well. Wait about two minutes for the isopropyl alcohol to penetrate and weaken the battery adhesive before you proceed to the next step.
Loosen the battery adhesive
  • Apply a few drops of high concentration (90% or greater) isopropyl alcohol underneath the battery at the tear-shaped indents near the corners of the battery well.

  • Wait about two minutes for the isopropyl alcohol to penetrate and weaken the battery adhesive before you proceed to the next step.

在电池下面,在电池槽角附近的泪状凹痕处滴几滴高浓度(90%或更高)的异丙醇。

在继续下一步之前,请等待约两分钟,以使异丙醇渗透并弱化电池胶粘剂。

Your contributions are licensed under the open source Creative Commons license.