Skip to main content
English
Dutch

Translating step 2

Step 2
Apply a few drops of high concentration (90% or greater) isopropyl alcohol underneath the battery at the tear-shaped indents near the corners of the battery well. Wait about two minutes for the isopropyl alcohol to penetrate and weaken the battery adhesive before you proceed to the next step.
Loosen the battery adhesive
  • Apply a few drops of high concentration (90% or greater) isopropyl alcohol underneath the battery at the tear-shaped indents near the corners of the battery well.

  • Wait about two minutes for the isopropyl alcohol to penetrate and weaken the battery adhesive before you proceed to the next step.

Dien een aantal druppels hooggeconcentreerde isopropyl alcohol (>90%) toe onder de batterij, bij de druppelvormige inkepingen in de buurt van de hoeken van de batterij-inkeping.

Wacht ongeveer twee minuten zodat de isopropyl alcohol in kan trekken en de lijm kan verzwakken voordat je met de volgende stap verder gaat.

Your contributions are licensed under the open source Creative Commons license.