Skip to main content
English
Italian

Translating step 2

Step 2
Apply a few drops of high concentration (90% or greater) isopropyl alcohol underneath the battery at the tear-shaped indents near the corners of the battery well. Wait about two minutes for the isopropyl alcohol to penetrate and weaken the battery adhesive before you proceed to the next step.
Loosen the battery adhesive
  • Apply a few drops of high concentration (90% or greater) isopropyl alcohol underneath the battery at the tear-shaped indents near the corners of the battery well.

  • Wait about two minutes for the isopropyl alcohol to penetrate and weaken the battery adhesive before you proceed to the next step.

Applica qualche goccia di alcool isopropilico ad alta concentrazione (>90%) sotto la batteria, negli intagli a forma di goccia vicino agli angoli dell'alloggio della batteria.

Aspetta circa due minuti per permettere all'alcool di penetrare e ammorbidire l'adesivo della batteria prima di continuare con il prossimo passo.

Your contributions are licensed under the open source Creative Commons license.