Skip to main content
English
Spanish

Translating step 2

Step 2
Apply a few drops of high concentration (90% or greater) isopropyl alcohol underneath the battery at the tear-shaped indents near the corners of the battery well. Wait about two minutes for the isopropyl alcohol to penetrate and weaken the battery adhesive before you proceed to the next step.
Loosen the battery adhesive
  • Apply a few drops of high concentration (90% or greater) isopropyl alcohol underneath the battery at the tear-shaped indents near the corners of the battery well.

  • Wait about two minutes for the isopropyl alcohol to penetrate and weaken the battery adhesive before you proceed to the next step.

Aplica unas pocas gotas de alcohol isopropílico de alta concentración (90% o más) debajo de la batería en las hendiduras en forma de lágrima cerca de las esquinas del pozo de la batería.

Espera unos dos minutos para que el alcohol isopropílico penetre y debilite el adhesivo de la batería antes de proceder al siguiente paso.

Your contributions are licensed under the open source Creative Commons license.