Skip to main content
English
German

Translating step 2

Step 2
Apply a few drops of high concentration (90% or greater) isopropyl alcohol underneath the battery at the tear-shaped indents near the corners of the battery well. Wait about two minutes for the isopropyl alcohol to penetrate and weaken the battery adhesive before you proceed to the next step.
Loosen the battery adhesive
  • Apply a few drops of high concentration (90% or greater) isopropyl alcohol underneath the battery at the tear-shaped indents near the corners of the battery well.

  • Wait about two minutes for the isopropyl alcohol to penetrate and weaken the battery adhesive before you proceed to the next step.

Gib etwas hochkonzentrierten Isopropylalkohol (mehr als 90%ig) in die tropfenförmigen Einbuchtungen nahe bei den Ecken des Akkufachs.

Lasse den Isopropylalkohol ungefähr zwei Minuten lang einwirken, damit der Kleber aufweicht, bevor du mit dem nächsten Schritt weitermachst.

Your contributions are licensed under the open source Creative Commons license.