Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
French

Translating step 29

Step 29
To ensure a strong bond, carefully tip the iMac flat on its back (with the screen facing straight up) and press carefully but firmly around all four edges of the display. Remove the tape securing the display to the rear enclosure. Check the display after 24 hours to make sure that it isn't loose on the iMac.
  • To ensure a strong bond, carefully tip the iMac flat on its back (with the screen facing straight up) and press carefully but firmly around all four edges of the display.

  • Remove the tape securing the display to the rear enclosure.

  • Check the display after 24 hours to make sure that it isn't loose on the iMac.

Pour que l'adhésif adhère bien, posez soigneusement l'iMac sur son dos (l'écran vers le haut) et appuyez avec précaution, mais fermement, sur les quatre bords de l'écran.

Décollez le ruban adhésif qui fixait l'écran au boîtier arrière.

Au bout de 24 heures, vérifiez que l'écran de l'iMac ne s'est relâché sur aucun des côtés.

Your contributions are licensed under the open source Creative Commons license.