Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Spanish

Translating step 2

Step 2
The core's plastic frame fits tightly within the watch's metal housing. Place the corner of the flat end of a spudger in the small opening of the barometric sensor, on the opposite side of the display connector.
Loosen the core assembly
  • The core's plastic frame fits tightly within the watch's metal housing.

  • Place the corner of the flat end of a spudger in the small opening of the barometric sensor, on the opposite side of the display connector.

  • Twist and tilt the spudger to lever the core assembly out of the metal housing.

El marco de plástico del núcleo encaja perfectamente en la carcasa metálica del reloj.

Coloca la esquina del extremo plano de un spudger en la pequeña abertura del sensor barométrico, en el lado opuesto del conector de la pantalla,

Gira e inclina el spudger para sacar el ensamblaje principal de la caja metálica.

Your contributions are licensed under the open source Creative Commons license.