Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 26 guides that include this step.

English
German

Translating step 8

Step 8
Peel back the digitizer ribbon cable and use the flat end of a spudger to release the adhesive securing the cable to the rear aluminum case. Peel back the digitizer ribbon cable and use the flat end of a spudger to release the adhesive securing the cable to the rear aluminum case.
  • Peel back the digitizer ribbon cable and use the flat end of a spudger to release the adhesive securing the cable to the rear aluminum case.

Löse das Flachbandkabel zum Digitizer und trenne mit dem flachen Ende des Spudgers die Klebeverbindung des Kabels zum Aluminium-Rückgehäuse.

Your contributions are licensed under the open source Creative Commons license.