Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 26 guides that include this step.

English
German

Translating step 7

Step 7
Use the flat end of a spudger to loosen the adhesive underneath the digitizer ribbon cable. Pull the digitizer ribbon cable straight out of its sockets on the logic board.
  • Use the flat end of a spudger to loosen the adhesive underneath the digitizer ribbon cable.

  • Pull the digitizer ribbon cable straight out of its sockets on the logic board.

Löse die Klebeverbindung unter dem Digitizer-Flachbandkabel mit dem flachen Ende des Spudgers.

Ziehe das Digitizer-Flachbandkabel gerade aus dem Sockel auf dem Logic Board.

Your contributions are licensed under the open source Creative Commons license.