Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 26 guides that include this step.

English
German

Translating step 5

Step 5
Using the tip of a spudger, peel back the piece of tape that secures the digitizer ribbon cable to the logic board.
  • Using the tip of a spudger, peel back the piece of tape that secures the digitizer ribbon cable to the logic board.

Ziehe das St├╝ckchen Klebeband, welches das Flachbandkabel zum Digitizer am Logic Board befestigt, mit der Spudgerspitze ab.

Your contributions are licensed under the open source Creative Commons license.