Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
French

Translating step 9

Step 9
Remove the two 2.1 mm Phillips screws securing the second metal bracket to the rear case near the digitizer cable socket. Remove the metal bracket from the rear case.
  • Remove the two 2.1 mm Phillips screws securing the second metal bracket to the rear case near the digitizer cable socket.

  • Remove the metal bracket from the rear case.

Retirez les deux vis Phillips de 2,1 mm fixant le deuxième support métallique sur le boîtier arrière près de la prise du câble du numériseur.

Retirez le support métallique de l'étui arrière.

Your contributions are licensed under the open source Creative Commons license.