Fix Your Stuff Community Store

2017年款27寸iMac 显示屏更换

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Previous step Next step

Translating step 22

Back to Guide
English
Chinese
Step 22
iMac 27" 2017 Display Assembly Replacement, Remove the remaining adhesive: step 0, image 1 of 3 iMac 27" 2017 Display Assembly Replacement, Remove the remaining adhesive: step 0, image 2 of 3 iMac 27" 2017 Display Assembly Replacement, Remove the remaining adhesive: step 0, image 3 of 3
Remove the remaining adhesive

  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

  • Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.

  • Repeat this step with the other adhesive strip and remove it.

  • If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive.

去除剩余的粘合剂

注意不要触摸电容器引线或电源背面的任何裸露的焊点（红色框）。

抓住底部边缘显示屏粘着条之一末端的小拉条，然后将小拉条拉向iMac的顶部以将其移除。

对另一条小拉条重复此步骤，然后将其取下。

如果任一条小拉条在拆除前都破裂了，请使用塑料卡切下剩余的胶粘剂。

Your contributions are licensed under the open source Creative Commons license.