Fix Your Stuff Community Store

iMac 27" 2017 디스플레이 어셈블리 교체

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Previous step Next step

Translating step 22

Back to Guide
English
Korean
Step 22
iMac 27" 2017 Display Assembly Replacement, Remove the remaining adhesive: step 0, image 1 of 3 iMac 27" 2017 Display Assembly Replacement, Remove the remaining adhesive: step 0, image 2 of 3 iMac 27" 2017 Display Assembly Replacement, Remove the remaining adhesive: step 0, image 3 of 3
Remove the remaining adhesive

  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

  • Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.

  • Repeat this step with the other adhesive strip and remove it.

  • If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive.

나머지 접착제 제거

전원 장치 후면의 축전기 납 또는 노출된 납 접합을 건드리지 않도록 각별히 주의하세요 (빨간색 상자).

하단 가장자리 디스플레이 접착 스트립 중 하나의 끝에 있는 작은 탭을 잡아서 iMac 상단을 향해 당기며 제거하세요.

다른 접착 스트립에 이 단계를 반복하여 제거하세요.

접착 스트립 중 한 개가 제거되기 전에 끊어지면 플라스틱 카드를 사용하여 나머지 접착제를 자르세요.

Your contributions are licensed under the open source Creative Commons license.