Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
German

Translating step 1

Step 1
Remove the two 4 mm Phillips #00 screws holding the plastic cover in place.
Unfasten Motherboard Cover
  • Remove the two 4 mm Phillips #00 screws holding the plastic cover in place.

Entferne die beiden 4 mm Kreuzschlitzschrauben, mit denen die Kunststoffabdeckung befestigt ist.

Your contributions are licensed under the open source Creative Commons license.