Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
French

Translating step 1

Step 1
Remove the four 8.5 mm Phillips screws securing the heat sink to the logic board.
  • Remove the four 8.5 mm Phillips screws securing the heat sink to the logic board.

  • A spring is held under each of these screws.

Retirez les quatre vis cruciformes de 8,5 mm fixant le dissipateur thermique sur la carte mère.

Un ressort est maintenu sous chacune de ces vis.

Your contributions are licensed under the open source Creative Commons license.