Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
Spanish

Translating step 1

Step 1
Remove the four 8.5 mm Phillips screws securing the heat sink to the logic board.
  • Remove the four 8.5 mm Phillips screws securing the heat sink to the logic board.

  • A spring is held under each of these screws.

Retire los cuatro tornillos Phillips de 8,5 mm que sujetan el disipador de calor a la placa lógica.

Un resorte se mantiene debajo de cada uno de estos tornillos.

Your contributions are licensed under the open source Creative Commons license.