Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
German

Translating step 1

Step 1
Remove the four 8.5 mm Phillips screws securing the heat sink to the logic board.
  • Remove the four 8.5 mm Phillips screws securing the heat sink to the logic board.

  • A spring is held under each of these screws.

Entferne die vier 8,5 mm Kreuzschlitzschrauben, welche den Kühlkörper am Logic Board befestigen.

Unter jeder der vier Schrauben befindet sich eine Feder.

Your contributions are licensed under the open source Creative Commons license.