Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 10 guides that include this step.

English
Dutch

Translating step 2

Step 2
Starting on the left side of the display, near the power button, insert the iMac Opening Tool into the gap between the glass panel and the rear enclosure. The hub on the iMac Opening Tool will keep you from pushing the wheel in too far. If using a different tool, insert no more than 3/8" into the display. Otherwise, you risk severing antenna cables and causing serious damage.
Insert the opening tool
  • Starting on the left side of the display, near the power button, insert the iMac Opening Tool into the gap between the glass panel and the rear enclosure.

  • The hub on the iMac Opening Tool will keep you from pushing the wheel in too far. If using a different tool, insert no more than 3/8" into the display. Otherwise, you risk severing antenna cables and causing serious damage.

Steek je iMac-openingstool in de opening tussen het glazen paneel en de achterste behuizing. Begin aan de linkerkant van het scherm, in de buurt van de aan-/uitknop.

De naaf op de iMac-openingstool weerhoudt je ervan om het wiel te ver in het toestel te duwen. Als je een andere tool gebruikt, zorg dan dat je deze niet meer dan 3/8" (is ongeveer 9.5 mm) in het scherm brengt. Anders loop je het risico de antennekabels te beschadigen.

Your contributions are licensed under the open source Creative Commons license.