Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
German

Translating step 12

Step 12
The next few steps will show you how to install the bottom right adhesive strip (strip 25), which includes a notch that must be aligned with the microphone.
Install the bottom adhesives
  • The next few steps will show you how to install the bottom right adhesive strip (strip 25), which includes a notch that must be aligned with the microphone.

  • Read through this step and the next four steps before you attempt the procedure.

  • Grasp the red pull tab on strip 25 and pull to separate about 2 inches (5 cm) of white backing from the strip.

In den nächsten Schritten wird der untere rechte Klebestreifen (Streifen 25) angebracht; er hat eine Ausbuchtung, die genau an das Mikrofon angepasst werden muss.

Lies zuerst diesen Schritt und die nachfolgenden vier durch, bevor du anfängst.

Fasse die rote Zuglasche an Streifen 25 an und ziehe ungefähr 5 cm der weißen Schutzfolie ab.

Your contributions are licensed under the open source Creative Commons license.