Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
French

Translating step 17

Step 17
Repeat the previous steps for the bottom left adhesive strip (strip 26), aligning and placing it along the bottom left edge of the iMac. The strip should be positioned such that the L-bend sits next to the left vertical adhesive. The L-bend should not overlap the left vertical adhesive. Once you've applied all the adhesive strips, the iMac should look as shown in the second photo.
  • Repeat the previous steps for the bottom left adhesive strip (strip 26), aligning and placing it along the bottom left edge of the iMac.

  • The strip should be positioned such that the L-bend sits next to the left vertical adhesive. The L-bend should not overlap the left vertical adhesive.

  • Once you've applied all the adhesive strips, the iMac should look as shown in the second photo.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.