Skip to main content

Fix Your Stuff

Right to Repair

Store

English
Italian

Translating step 9

Step 9
The internal circuit board was also attached a MEMS Microphone that appeared to be monitoring the Speaker Chamber of the Headphone, since it was faced in I had to remove the outside panel with 'R' on it with a Razor Knife to free the MEMS Microphone. Once the MEMS Microphone was freed, the interface board circuit could be pulled out USB and Power (Charger) Interface
  • The internal circuit board was also attached a MEMS Microphone that appeared to be monitoring the Speaker Chamber of the Headphone, since it was faced in

  • I had to remove the outside panel with 'R' on it with a Razor Knife to free the MEMS Microphone. Once the MEMS Microphone was freed, the interface board circuit could be pulled out

  • USB and Power (Charger) Interface

  • Sound Ports

  • Internal Circuit Board that interface Power and USB to the Headphones

  • MEMS Microphone from plastic collar in the Headphone

  • MEMS Microphone separated from the Interface Circuit Board when removed from the side of the Speaker Chamber

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.