Skip to main content
English
Chinese

Translating step 15

Step 15
Double-check the fit and alignment of your new battery before sticking it down. If your battery came with adhesive pre-installed on the bottom, flip it over and carefully peel away the liner to expose the adhesive. If your battery did not come with adhesive, apply a thin double-sided adhesive tape such as Tesa 61395 to keep your battery in place. Carefully position the battery and set it into place.
  • Double-check the fit and alignment of your new battery before sticking it down.

  • If your battery came with adhesive pre-installed on the bottom, flip it over and carefully peel away the liner to expose the adhesive. If your battery did not come with adhesive, apply a thin double-sided adhesive tape such as Tesa 61395 to keep your battery in place.

  • Carefully position the battery and set it into place.

  • Press and hold each cell firmly for 5-10 seconds to secure it to the lower case.

放下之前,请仔细检查新电池的安装和对准情况。

如果你的电池底部预装有粘合剂,请将其翻转过来,然后小心地剥离内衬以露出粘合剂。如果你的电池没有粘合剂,请使用薄的双面胶带(例如Tesa 61395)将电池固定到位。

小心放置电池并将其放置到位。

牢牢按住每个单元格5-10秒钟,以将其固定到底壳。

Your contributions are licensed under the open source Creative Commons license.